New

Extensible Stage Controller (Slave Unit for 2-phase Stepping Motor) / HIT-SA-M2

Modular stage control system with Master controller (HIT-MV or HIT-M) and maximum eight slave Axes. Equipped with a 2-phase bipolar stepping motor driver, it can control stages with 2-phase stepping motor.

Contact us

Part Number
HIT-SA-M2
S$681.81
  • 2-phase stepping motor stages can be controlled with the same number of division settings as general 5-phase stepping motor stages. (Note 1)
More Information
Catalog Code W9048
RoHS Yes
CE Yes
Download Product's Datasheet
Download Product's Documents
Guide
  • The Stage cable (D15RP cable/D15D15A cable) and Scale cable (GSEF cable) used for existing 5-phase stepping motor stages can be commonly used.
  • The following sample programs can be downloaded from WEB.
    ◦SG Sample for 32/64-bit Windows® version
    ◦LabVIEW
Attention
  • The power supply specification of HIT-SA-M2 is DC+24[V] 2[A]. Please prepare a power supply with a rated current of 3[A] (1 axis) to 17[A] (8 axes) depending on the number of stage axes including the Master Unit. The AC-ADP-2427 (AC adapter) must be purchased or provided by the customer.
  • (Note 1)Only a 2-phase stepping motor with a basic step angle of 1.8[degrees] can drive a stage with the same number of divisions as a 5-phase stepping motor with a basic step angle of 0.72[degrees].
    (e.g., if the number of divisions is set to "1" for a 2-phase stepping motor with a basic step angle of 1.8[degrees], one revolution of the motor will result in 500 pulses). For details, please refer to the instruction manual.
Power Consumption 48VA
External Dimensions (W×H×D) 130×120×50mm
Driving Current 0.3 - 1.8A/phase
Power Voltage DC24V 2A
Storage Temperature -20~60℃
Driver Function 2-Phase Bi-polar constant current drive
Micro-step (Max. Division) 250
Weight 0.62kg
Storage Temperature 20 - 80%RH(without condensation)
Temperature of Operation 5~40℃