Super Mirror / TFHSM
The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.
Specifications
Material | Synthetic Fused Silica | |
---|---|---|
Coating | Front Surface: Dielectric Multi-layer High-Reflection Coating Rear Surface: Dielectric Multi-layer Anti-Reflection Coating |
|
Incident Angle | 0° | |
Surface Flatness of Substrate | λ/10 | |
Parallelism | <5″ | |
Surface Quality (Scratch-Dig) | 10-5 | |
Clear Aperture | 80% of the diameter | |
Reflectance of Rear Surface | <0.15% | |
Substrate Type | Optical Flat |
Schematic | Outline Drawing |
---|---|
Part Number | Wavelength Range | Diameter φD |
Thickness t |
Reflectance*1 | Loss*2 |
---|---|---|---|---|---|
TFHSM-12.7C06-532 | 532nm | φ12.7mm | 6mm | 99.995% | 20ppm |
TFHSM-25C06-532 | 532nm | φ25mm | 6mm | 99.995% | 20ppm |
TFHSM-25.4C06-532 | 532nm | φ25.4mm | 6mm | 99.995% | 20ppm |
TFHSM-30C06-532 | 532nm | φ30mm | 6mm | 99.995% | 20ppm |
TFHSM-50C08-532 | 532nm | φ50mm | 8mm | 99.995% | 20ppm |
TFHSM-12.7C06-1064 | 1064nm | φ12.7mm | 6mm | 99.999% | 8ppm |
TFHSM-25C06-1064 | 1064nm | φ25mm | 6mm | 99.999% | 8ppm |
TFHSM-25.4C06-1064 | 1064nm | φ25.4mm | 6mm | 99.999% | 8ppm |
TFHSM-30C06-1064 | 1064nm | φ30mm | 6mm | 99.999% | 8ppm |
TFHSM-50C08-1064 | 1064nm | φ50mm | 8mm | 99.999% | 8ppm |
*1 The above is the reflectance measured in the CRD method. However, there may vary depending on measurement conditions and measurement method.
*2 The values indicated in “Loss” is only reference data.These data will not be attached with the product