Ultra compact Tilt Sensor / TM-2070

This product is a non-contact angle measurement system consisting of an optical autocollimator that utilizes a semiconductor laser.

Part Number

TM-2070

Details

Equipped with the world's top class miniaturized optical sensor head
Can be installed in narrow spaces that were not possible with conventional autocollimators.

More Information

More Information

RoHS

Download Product's Datasheet

TM-2070	[ PDF ]	[ DXF ]
GP-2000		[ DXF ]

Guide

▶Supports various system configurations
Compatible with various hardware such as Windows PC, PLC, Smartphones and Tablets.
The DIO function enables LD control, Relative origin control, and Status monitoring during measurement.
▶Accessories
GP-2000 (image processing unit) / Sensor cable (1m) / Power cables / Rubber pads / Software (Windows 10 Japanese/ English version, 32/64-bit version)
▶The image processing unit can be mounted on a DIN rail.

Attention

▶The appearance and specifications of the product are subject to change without notice for improvement.
Be sure to use the attached sensor cable. A 2m sensor cable is also available as an option.
Please use the rubber pads when installing GP-2000.

Specifications

Specifications
Part Number		TM-2070
Object to be measured		Optical surface (R>0.5%)
Measurement item		Tilt (θX,θY)
Measurable distance and range		0～110mm ±70arcmin. 0～170mm ±45arcmin. 0～250mm ±30arcmin.
Measuring method		Optical autocollimator
Range	Tilt (θX,θY)	±70arcmin. (Circular area)
Repeatability^※1		1arcsec.
Linearity^※2		±0.25% of F.S.（±0.350.35arcmin.）
Light source	Wavelength	650±10nm
	Output	1mW max. (JIS C6802 2014 Class 2)
	Beam diameter	Φ1mm^※3
Digital Input / Output	D-Sub 9pin male	Measurement data output (60data/sec.), Control command input
	mini USB Mini-B	Image data output^※4
	XG4A-2034 (Omron)	IN ：TARGET,LD ON/OFF,APC,SOFT RESET OUT：READY、REL,OK、NG、ND、ER、LD ON、GOOD
Power consumption		Max. 15W
Dimensions (excluding protrusions)		TM-2070：W38×D42×H18mm GP-2000：W50×D55×H100mm
Weight		TM-2070：0.1kg GP-2000 0.3kg

※1 6σ when measuring in a stationary state with a standard sample installed at W.D.50 mm. When the camera brightness (PK) is 180
※2 Indicates the error with respect to the ideal straight line when measuring with the standard sample installed at W.D.50 mm. It may change depending on the object to be measured.
※3 Diameter immediately after sensor injection. (1 / e² width)
※4 It is possible to check the camera image by using the dedicated software "GP-2000 Paramset".

CONTACT US | Tel : (65) 9232 3999 | Email : [email protected]

Ultra compact Tilt Sensor / TM-2070

OptoSigma Southeast Asia Pte.Ltd.

Global Network

Product Categories

Request for Catalogues

YouTube

Account Registration / Sign In

SUPPORT & CONTACT US

SOFTWARE INFORMATION

COMPANY SITE

CAREERS