X Axis Aluminum Crossed Roller Translation Stages / TAM-651CWP-M6
High precision crossed-roller linear translation stages with black anodized aluminum bodies.
This product is an optional product in which the standard □65 stage micrometer is recombined with a worm-drive coarse/fine micrometer.
This product is an optional product in which the standard □65 stage micrometer is recombined with a worm-drive coarse/fine micrometer.
Contact us
Part Number
TAM-651CWP-M6
S$522.72
◦Bottom counter bore clearance holes are sized and spaced to accept both M6 or 1/4 size screws for mounting these stages down to a table.
◦Both M6 or 1/4-20 inch tapped hole versions available.
◦Both left and right hand adjustment versions available.
◦Multiple actuator options available. Standard micrometer, sub-micron micrometer, fine pitch screw.
◦All stages are equipped with a robust knurled head locking screw.
◦Both M6 or 1/4-20 inch tapped hole versions available.
◦Both left and right hand adjustment versions available.
◦Multiple actuator options available. Standard micrometer, sub-micron micrometer, fine pitch screw.
◦All stages are equipped with a robust knurled head locking screw.
Catalog Code | W7123 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Attention | ▶Micrometer brackets may extend above the top surface of some stages. Check drawings for more information. ▶Note that some samples might not be able to be fixed on the stage depending on their shapes, or required travel might not be ensured. ▶When fixing the stage to the base, two screws (out of four) cannot be mounted because the counterbored holes for the mounting screws cannot be fully exposed by simply sliding the stage's upper table with the worm-drive coarse/fine micro (WGP). For this reason, remove the micrometer bracket holding the WGP to the lower plate of the stage from the lower plate, slide the upper table to the maximum extent, and then fix the stage to the base with the mounting screws. After fixing the stage to the base, fix the WGP micrometer bracket to the bottom plate. When removing the micrometer bracket of the WGP during installation, the top table returns vigorously by spring force. Please use a clamp or your hand to carefully slide the upper table. |
3D_CAD | |
Stage Size | 65×65mm |
Micrometer Readable Resolution | Coarse:0.005mm Fine:0.0005mm |
Micrometer Position | Center |
Moment Stiffness / Pitch | 0.3″/N・cm |
Moment Stiffness / Roll | 0.25″/N・cm |
Guide Method | Crossed roller |
Travel Accuracy / Pitch | 25″(TAM-651*25-M6、TAM-651*25UUは35″) |
Travel Accuracy / Yaw | 15″(TAM-651*25-M6、TAM-651*25UUは25″) |
Travel Accuracy / Straightness | 2μm |
Running Parallelism | 10μm |
Travel | ±6.5mm |
Lead of Actuator | Coarse:0.25mm Fine:0.005mm |
Max. Moment Capacity / Pitch | 4.9N・m |
Max. Moment Capacity / Yaw | 4.9N・m |
Max. Moment Capacity / Roll | 4.9N・m |
Weight | 0.3kg |
Primary material | Aluminum |
Load Capacity | 196N(20.0kgf) |
Finish | Black anodized |
Parallelism | 30μm |