Center Unit with Horizontal Contact Sensor / CEUT-HRT-5

• When used in combination with a fiber alignment unit (DAU-8100A series), a system that enables fiber alignment can be constructed.
• When used in combination with an observation unit (OBUT series), an observation system can be constructed to check the positions positional relationship between fibers and samples.
• Various device holders are available for different sample sizes. Please refer to Device Holders (RTH Series) or Device Holders with Temperature Control (TECH Series).
• The centering unit (CEUT series) comes with a 2-meter vacuum suction tube.
• Please contact our sales department for specifications and additions not listed here.

• When fixing the sample with the clamp screws, please be careful of the tightening force. Excessive tightening may cause damage to the sample.
• Please contact our sales department for details on connecting load cells, amplifiers, and multi-controllers.
• A vacuum pump is required to use the vacuum pump. Refer to Vacuum Pump (DA-20D) for the recommended model.
• A Peltier controller is required to use the temperature control function. Please refer to Peltier Controller (TDU-5000AR) for the recommended peltier controller and connection cable.

*1 Device holders of different applicable sizes are available as stand-alone products.
*2 Please contact our sales department for the connection of load cells, amplifiers, and multi-controllers.