- HOME >
- Optical System & Interferometers >
- D-TOP Optical System
D-TOP optical system offers a new alternative to the optical experiment.
By breaking the stereotype that says “optical system can not be moved due to the heavy and large”,
we propose a highly stable optical system that is capable of carrying with a compact size.
In case of D-TOP optical system, optical elements and holders, which have been used until now,can be used as it is, you can save the initial investment. Moreover, by replacing the experimentalsystem of surface plate with the D-TOP optical system, it becomes possible to remove or for space saving and enables effective use of the space occupied by the optical system.
Characteristics of D-TOP
possible to place accurately a holder by refined and simple structure on the optical axis.
Also, possible to change the position of the holder and the height of the optical axis.
D-TOP optics can be sold from one base plate. Referring to the configuration of the practical example and module, please select a various device.
There may not be fixed a light source, sample with a special shape and detector in the existing holders.
In this case,custom-made base, holder and adapter are available. If D-TOP base and catalog products can be combined, the custommade manufacturing is reduced, and it is possible for configuration at low cost. If the custom-made holder and base are requested, please inform us the exact shape of each device and the height of the optical axis.
In addition, it is also available for design, production, adjustment and functional verification of the optical system based on the D-TOP optical system.
To meet customers’ needs, we will answer to the needs of every stage.
It is a post stand of φ20mm that has been optimized
for the low optical axis and compact for D-TOP.
It is very useful when holders of different heights of optical axis are adjusted to the same heights of optical axis.
According to the height of the optical axis of the holder, please specify the L dimension.
the mounting of the holder can be mounted to the tap hole of M4 rod and M6 rod by using the screws provided
Part Number | JP Yen | L Specified range[mm] | Add to Cart |
PS20-L | 3,400 | 10≦L≦30 |
When it is fixed the long hole with a screw by the side of slotted clamp,
it becomes the 20mm offset mounting of MHG series holder.
Please securely tighten until tighten the post stand does not turn.
It is a base plate to fix φ20mm post stand. By only a little loosing a clamping screw of slotted,
it can be replaced holders without changing position and adjusted the height of the optical axis.
It is also possible for the offset (20mm) correction between the mounting position of Kinematic Mirror Holder (MHG-MP20-NL/MP25-NL/MP30-NL) and the mirror surface.
Part Number | JP Yen | Offset (Diagonal direction) [mm] |
Optical Axis Height[mm] |
Add to Cart |
DBSP-1 | 13,000 | 0〜2.6、20〜22.6 | 0〜5 |
It is a base plate to fix φ20mm post stand.
It is used when thin elements such as a lens and
a polarizer are placed close to the optical axis.
It is a base plate to fix φ20mm post stand.
It is accessible from any direction because of set bolt attached to the four directions.
Part Number | JP Yen | Optical Axis Height [mm] |
Add to Cart |
DBSP-2 | 20,000 | 5 |
It is a breadboard of B4 size for D-TOP.
To remove wasted space regarding the placement of the existing holders, it adopted a matrix M3-16mm tap hole.
As arranging four breadboards squarely, on the surface plate with prepared M6 tap holes,it can be used as a single breadboard of 704mm × 512mm (poster size).
even if four breadboards are combined.
(It may slip off the error of the processing and mounting.)
Part Number | JP Yen | Top-mounted | Top-mounted [mm] |
Add to Cart |
DOBC-2632 | 64,000 | M3-16mm matrix | 10 |