Laser Barrier Apron / YLBA-11

Protects the operator‘s torso from the intense reflected and scattered light of high-power lasers.
It is an easy to put on and take off type apron for outdoor work in high temperature and high humidity, work in high places, and work in confined spaces.
Protects the worker's torso from the risk of unexpected exposure to intense reflections and scattered light during laser processing operations.

Part Number

YLBA-11

S$375.00

Details

Laser personal protective equipment made of "BARRITEX®", a special laser shielding material. While achieving sufficient shielding performance, the material is thin, lightweight, and highly flexible.

More Information

More Information

Catalog Code

W5072

RoHS

Download Product's Datasheet

PDF

Guide

“BARRITEX®” is a registered trademark of Yamamoto Kogaku Co.
Laser Barrier Gloves (YLBG-11 Series) are also available to protect fingertips and hands.
Laser Barrier Gloves (YLBG-11 Series) are also available to protect fingertips and hands.

Laser Resistant Performance Table Provided by Yamamoto Kogaku Co., Ltd.
Irradiation test of laser resistant material "BARRITEX®" only. Reference standard: EN12254:2010

Wavelength (continuous wave laser)	Irradiance/exposure	Penetration or not	Protection stage
1030nm	6.3×10⁵W/m² (200W)	non-penetrating (100sec.)	D AB5
1064nm	1.3×10⁷W/m² (10W)	non-penetrating (100sec.)	D AB5

Attention

Although this product blocks laser light, even scattered laser light may generate heat and become hot when irradiated for a long period of time. Please wear the product in such a way that it does not come in direct contact with the skin, as there is a risk of burns.
When wearing this product, please wear it so that the "YAMAMOTO" logo is on the front.
Do not use this product for any work other than laser processing work.
Always wear this apron in the laser-controlled area. Do not remove the apron while working.
If the apron is exposed to high laser energy or damaged even once, stop using it immediately and replace it as soon as possible.
Depending on one's constitution, itching, rash, etc. may occur during use. Discontinue use if any abnormality is detected.
High concentrations of chemicals (acids, alkalis, etc.), oils (kerosene, machine oil, etc.), and solvents (gasoline, benzene, etc.) may cause deterioration. Before handling chemicals, please check the chemical resistance of the product and confirm its safety before use.
After wetting or washing by hand, remove water, shape the product and hang it in the shade in a well-ventilated place.
　 *If you are concerned about stains, wipe off stains with a soft cloth soaked in diluted dishwashing detergent.
　 *Do not use bleach, especially chlorine-based reducing bleach.
Do not use a hair dryer, heater, etc. for forced drying.
Sunlight and ultraviolet rays may degrade the performance. Store in a dark place after use.
Modification or repair of the product by the user is dangerous and may cause accidents or damage to the product.