CCD Type Beam Profiler / OS-BeamOnHR
A CCD type beam profiler for both CW and pulsed lasers, providing improved analytical capability.
Contact us
Part Number
OS-BeamOnHR
◦High resolution CCD sensor supports both CW and pulsed lasers.
◦Supports a wide range of output with a filter (option) set in the accessory filter wheel.
◦Measures beam profiles, position and beam intensity with 350nm to 1310nm sensitivity.
Please contact our Sales Representatives, when using at wavelength over 1100nm.
◦Supports a wide range of output with a filter (option) set in the accessory filter wheel.
◦Measures beam profiles, position and beam intensity with 350nm to 1310nm sensitivity.
Please contact our Sales Representatives, when using at wavelength over 1100nm.
Catalog Code | W5034 |
---|---|
RoHS | No |
CE | No |
Download Product's Datasheet | |
Components | USB2.0 cable, post, filter wheel, software, carrying case |
Shutter Speed | 0.6s~1μs |
Power Consumption | 4W 6V |
Details | CCD camera with 350nm to 1310nm sensitivity |
Sensitivity | 633nm : 5nW/cm2 1310nm : 60μW/mm2 |
Camera Type | 1.4 mega-pixel, 1/2-inch progressive scan |
Gain Control | 1× - 23× |
Sensor Effective Area | 6.47mm×4.83mm |
Dynamic Range | 60DB (without filter) |
Damage Threshold | 50W/cm2 (with filter) |
Trigger | Operate the slide bar on the software display and decide the detection threshold. |
Trigger Terminal | RCA female, TTL4.5V rectangular wave. |
Used with Pulsed Laser | Measurement of laser output between 1Hz to 100Hz, also single shot measurement is possible. |
Frame Rate | 15fps(1392×1040) |
Pixel Size | 4.65μm×4.65μm |
Imaging Resolution | 1392×1040 |
Weight | 0.165kg |
Wavelength Sensitivity | 350nm − 1310nm (The sensitivity at wavelength over 1100nm is limited.) |
Saturation Point | 2mW/cm2 |