Photodiode Amplifier / PDA-1
A transimpedance amplifier that converts weak photodiode output current to voltage.
Highly sensitive and supports external operation with PC.
Highly sensitive and supports external operation with PC.
Contact us
Part Number
PDA-1
S$3,215.90
PDA-1
◦Six conversion ranges 105 − 1010 (V/A) and extremely large conversion ratio, enabling detection of weak light.
◦Operated from the front panel as well as by PC (RS232C interface). Excellent compatibility with measurement control software such as SGADVAVCEE.
◦Temperature control photodiode (PDA-PD-1 as option), achieving stable detection of weak light.
PDA-PD-1
◦PDA-PD-1 has built-in Peltier cooler, amplifier, temperature control circuit, and photo detector.
◦Peltier cooling module maintains low temperature.
◦Absorptive ND filters can be used and mounted to adjust the volume of exposed light.
◦0.5 meter length cable used.
◦Ultra low noise.
◦Six conversion ranges 105 − 1010 (V/A) and extremely large conversion ratio, enabling detection of weak light.
◦Operated from the front panel as well as by PC (RS232C interface). Excellent compatibility with measurement control software such as SGADVAVCEE.
◦Temperature control photodiode (PDA-PD-1 as option), achieving stable detection of weak light.
PDA-PD-1
◦PDA-PD-1 has built-in Peltier cooler, amplifier, temperature control circuit, and photo detector.
◦Peltier cooling module maintains low temperature.
◦Absorptive ND filters can be used and mounted to adjust the volume of exposed light.
◦0.5 meter length cable used.
◦Ultra low noise.
Catalog Code | W5007 |
---|---|
RoHS | No |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶C mount type of Temperature controlled Photodiode (PDA-PD-1) is available separately. Contact our International Sales Division for more information |
Electrical and Optical Characteristics (Ambient Temperature 25℃) Sensitivity wavelength range | - |
Electrical and Optical Characteristics (Ambient Temperature 25℃) MAX sensitivity wavelength | - |
MAX analog output voltage Load 2kΩ | 4V |
Measurement Gain Error (@Range 0 − 3) | 2% vs. max light received in range |
Interface | RS232C Photodiodo signal input connector (Attention: PD and photodiode are anode grounded) SIGMA’s photodiode special temperature control connector Signal output connector etc. |
External Dimensions | (W)150×(H)50×(D)200mm (Except for protrusions) |
Light Receiving Surface Size | - |
Ambient Humidity | 20 − 90%RH (without condensation) |
Operation Ambient Temperature | 0℃ − +40℃ |
Storage Ambient Temperature | −20℃ − +60℃ |
A/D Converter Resolution | 24bits (but effective resolution is 16bits) |
A/D Converter Conversion Frequency | 16Hz |
Amplifier Gain/Range 0 | 105V/A |
Amplifier Gain/Range 1 | 106V/A |
Amplifier Gain/Range 2 | 107V/A |
Amplifier Gain/Range 3 | 108V/A |
Amplifier Gain/Range 4 | 109V/A |
Amplifier Gain/Range 5 | 1010V/A |
Cutoff Frequency (@Range 1) | 3kHz |
Cutoff Frequency (@Range 3) | 30Hz |
Cutoff Frequency (@Range 5) | 0.3Hz |
Peltier Output Current | 1A (Special Photodiode) |
Temperature Control Temperature | −10℃ (Special photodiode) |
Temperature Control Fluctuation Temperature | 0.1℃ (Special photodiode) |
Measurement Gain Error (@Range 4) | 3% vs. max light received in range |
Measurement Gain Error (@Range 5) | 4% vs. max light received in range |
Temperature of Operation | 0℃− 40℃ (Except sensor) |