α Axis Leadscrew Goniometers with V-Groove Guide / GOHB-60A35
Economical goniometers equipped with the V-groove guide and the lead-screw drive.
The durability is enhanced by adapting the lead-screw drive.
The durability is enhanced by adapting the lead-screw drive.
In stock
Part Number
GOHB-60A35
S$511.36
◦Rotation center is larger than the conventional goniometers (GOH).
Catalog Code | W7103 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶Contact our Sales Division if you desire a rotation center height not listed in the catalog. |
Attention | ▶The vernier scale is not attached. |
3D_CAD | |
Rotation Center Displacement | φ0.05mm or less |
Travel per Knob Rotation | about 0.56° |
Stage Size | 60×60mm |
Moment Stiffness / Pitch | 0.4″/N・cm |
Moment Stiffness / Yaw | 0.2″/N・cm |
Moment Stiffness / Roll | 0.3″/N・cm |
Guide Method | V groove method |
Rotation Center Height | 35±0.1mm |
Angle Range | ±11° |
Max. Moment Capacity / Pitch | 2.0N・m |
Max. Moment Capacity / Yaw | 3.0N・m |
Max. Moment Capacity / Roll | 3.0N・m |
Weight | 0.65kg |
Primary material | Brass |
Load Capacity | 58.8N(6.0kgf) |
Finish | Super black chrome |
Type of Axis | α axis |