Rotation Stages (Worm Nut and Gear Drive) / KSW-1206-M6
An integrated worm gear drive makes these rotation stages are capable of precise adjustment over a full 360°rotation.
Contact us
Part Number
KSW-1206-M6
S$110,000.00
◦The through hole at the center of the stage can be used as a transmission hole.
◦In order to switch coarse / fine adjustment, please use a set screw inside of the side surface of the rotation stage. (The location of the set screw is indicated by ▽ mark.)
◦In order to switch coarse / fine adjustment, please use a set screw inside of the side surface of the rotation stage. (The location of the set screw is indicated by ▽ mark.)
Catalog Code | W7507 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Attention | ▶KSW-256 and KSW-1006 do not have a clamping mechanism. ▶KSW-256 and KSW-406 do not have a vernier scale. ▶KSW-1006 does not have a clamping mechanism. |
3D_CAD | |
Knob Rotation Angle | 1.62°/rotation |
Stage Size | φ120mm |
Moment Stiffness | 0.15″/N・cm |
Guide Method | Crossed roller |
Rotation Range | Coarse :360° Fine :360° |
Max. Moment Capacity | 9.8N・m |
Weight | 2.2kg |
Primary material | Brass |
Load Capacity | 196N(20.0kgf) |
Finish | Super black chrome |
Parallelism | 60μm |
Eccentricity | 30μm |
Wobble | 30μm |
Scale Readable Resolution | 5′ |