Rotation Stages (Worm Nut and Gear Drive) / KSW-606
An integrated worm gear drive makes these rotation stages are capable of precise adjustment over a full 360°rotation.
In stock
Part Number
KSW-606
S$43,000.00
◦The through hole at the center of the stage can be used as a transmission hole.
◦In order to switch coarse / fine adjustment, please use a set screw inside of the side surface of the rotation stage. (The location of the set screw is indicated by ▽ mark.)
◦In order to switch coarse / fine adjustment, please use a set screw inside of the side surface of the rotation stage. (The location of the set screw is indicated by ▽ mark.)
| Catalog Code | W7507 |
|---|---|
| RoHS | Yes |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Attention | ▶KSW-256 and KSW-1006 do not have a clamping mechanism. ▶KSW-256 and KSW-406 do not have a vernier scale. ▶KSW-1006 does not have a clamping mechanism. |
| 3D_CAD | |
| Knob Rotation Angle | about 4°/rotation |
| Stage Size | φ60mm |
| Moment Stiffness | 0.9″/N･cm |
| Guide Method | Lapping method |
| Rotation Range | Coarse :360° Fine :360° |
| Max. Moment Capacity / Pitch | 0.49N･m |
| Weight | 0.55kg |
| Primary material | Brass |
| Load Capacity | 98N(10.0kgf) |
| Finish | Super black chrome |
| Parallelism | 50μm |
| Eccentricity | 20μm |
| Wobble | 20μm |
| Scale Readable Resolution | 10′ |
