XY Axis Aluminum Crossed Roller Translation Stages / TAM-652SRDM-M6
High precision crossed-roller linear translation stages with black anodized aluminum bodies.
Contact us
Part Number
TAM-652SRDM-M6
S$116,000.00
◦Bottom counter bore clearance holes are sized and spaced to accept both M6 or 1/4 size screws for mounting these stages down to a table.
◦Both M6 or 1/4-20 inch tapped hole versions available.
◦Both left and right hand adjustment versions available.
◦Multiple actuator options available. Standard micrometer, sub-micron micrometer, fine pitch screw.
◦All stages are equipped with a robust knurled head locking screw.
◦Both M6 or 1/4-20 inch tapped hole versions available.
◦Both left and right hand adjustment versions available.
◦Multiple actuator options available. Standard micrometer, sub-micron micrometer, fine pitch screw.
◦All stages are equipped with a robust knurled head locking screw.
| Catalog Code | W7124 |
|---|---|
| RoHS | Yes |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Attention | ▶Micrometer brackets may extend above the top surface of some stages. Check drawings for detailed information. ▶Note that based upon payload size, rated travel could be reduced. |
| 3D_CAD | |
| Stage Size | 65×65mm |
| Micrometer Readable Resolution | Coarse：0.01mm Fine：0.0005mm |
| Micrometer Position | Side |
| Moment Stiffness / Pitch | 0.6″/N・cm |
| Moment Stiffness / Roll | 0.6″/N・cm |
| Guide Method | Crossed roller |
| Travel Accuracy / Pitch | 25″（TAM-651*25-M6、TAM-651*25UUは35″） |
| Travel Accuracy / Yaw | 15″（TAM-651*25-M6、TAM-651*25UUは25″） |
| Travel Accuracy / Straightness | 2μm |
| Running Parallelism | 20μm |
| Travel | ±6.5 |
| Lead of Actuator | Coarse：0.5mm Fine：0.025mm |
| Max. Moment Capacity / Pitch | 4.9N・m |
| Max. Moment Capacity / Yaw | 4.9N・m |
| Max. Moment Capacity / Roll | 4.9N・m |
| Weight | 0.3kg |
| Primary material | Aluminum |
| Load Capacity | 196N（20.0kgf） |
| Finish | Black anodized |
| Parallelism | 50μm |
| Orthogonality | 10μm |
