Joystick Terminal / SJT-02
A dedicated joystick terminal for the GSC-02 controller to manually operate a motorized stage.
Internal program memory allows automatic operation without using a PC.
Internal program memory allows automatic operation without using a PC.
In stock
Part Number
SJT-02
S$795.45
◦Enables manual operation of attached motorized stages.
◦Internal program memory allows automatic operation without using a PC.
◦Internal program memory allows automatic operation without using a PC.
Catalog Code | W9049, W9044 |
---|---|
RoHS | Yes |
CE | Yes |
Download Product's Datasheet | |
Guide | ▶Please click here to download a controller manual. |
Attention | ▶Pin 1 of GSC-02 connector for use with the SJT-02 has an electrical output of +24V. Under no circumstances should it be connected to a PC. Although it has a protective circuit, be sure to disconnect either RS232C or SJT-02, otherwise there is a risk of damage. * If RS232C and SJT-02 are connected at the same time, neither of them will function. |
Type | Joystick |
Display | LDC 16 digits, 2 lines |
Program Memory Capacity | 128 steps × 4 channels |
Program Parameter | Wait time 0 − 25.5 [sec] Unit: 0.1 sec |
Motor Rotation Direction | X axis: Positive (POS) / Negative (NEG) Y axis: Positive (POS) / Negative (NEG) |
Limit Sensor Status | X axis: Displayed left side of coordinate symbol (“L” is displayed when detected.) Y axis: Displayed left side of coordinate symbol (“L” is displayed when detected.) |
Acceleration/Deceleration Time | (R) 0 − 1000mS |
(W)94×(H)30×(D)140mm | |
Origin Return Axes | X axis only / Y axis only / Both axes |
Coordinate Input Range | X axis: Approx. −16777214 − +16777214 pulses Y axis: Approx. −16777214 − +16777214 pulses |
Coordinate Display Unit | 〔PLS〕〔μm〕〔°〕 |
Coordinate Indication Range | X axis: Approx. −99999999 − +99999999 pulses Y axis: Approx. −99999999 − +99999999 pulses |
Min. Driving Speed | (S) 1~20,000pps |
Max. Driving Speed | (F) 1~20,000pps |
Weight | 0.6kg (including a special cable) |
Storage Temperature | 20 - 80%RH(without condensation) |
Number of Controlling Axis | 2 axes |
Connecting Cable | Attached special connecting cable 2m (detachable) |
Operation Mode | MANUAL (M) / TEACHING (T) /PROG RUN (R) / EDIT (E) / MEM SW SET Mode |
Speed Parameter | Switchable among 10 steps |
Battery | DC+24V Supplied from a 2 axis stage controller (GSC-02/SHOT-602). |
Temperature of Operation | 5~40℃ |