High Durability Motorized Rotation Stages / HDS-80YAW
Limited range high duty cycle rotation stage.
In stock
Part Number
HDS-80YAW
S$2,272.72
◦Good for the automatic alignment devices which need to repeatedly adjust the angle of rotation by a small amount.
◦The ball screw system drive mechanism reduces abrasion and backlash for high durability.
◦Since it converts linear motion of the ball screw into rotational motion using a steel belt, the angular spped and resolutionis the same over the full range of travel.
◦The ball screw system drive mechanism reduces abrasion and backlash for high durability.
◦Since it converts linear motion of the ball screw into rotational motion using a steel belt, the angular spped and resolutionis the same over the full range of travel.
Catalog Code | W9087 |
---|---|
RoHS | Yes |
CE | Yes |
Download Product's Datasheet | |
CAD data | |
Guide | ▶The origin sensor for HDS series is near traveling center (0°). |
Attention | ▶The HDS series should always be mounted horizontally. Performance can not be guaranteed if used in other orientations. If other oritnations are required, please contact our Sales Division. |
3D_CAD | |
MAX Speed | 60°/sec |
Stage Material | Aluminium |
Sensor Part Number | Micro photo sensor : GP1S097HCZ(Sharp Corporation) |
Stage Size | φ80mm |
Backlash | 0.05° |
Resolution (Half) | about 0.0019°/pulse |
Resolution (Full) | about 0.0038°/pulse |
Moment Stiffness | 0.2″/N・cm |
Limit Sensor | Equipped (NORMAL CLOSE) |
Lost Motion | 0.003° |
Positioning Accuracy | 0.05° |
Positioning Slide | Bearing method |
Travel Mechanism | Ball screw with steel belt |
Rotation Range | ±5° |
Proximity Origin Sensor | None |
Positional Repeatability | 0.003° |
Origin Sensor | Equipped (NORMAL OPEN) |
Minimum Incremental Motion (reference) | 0.5mdeg |
Weight | 1.3kg |
Load Capacity | 58.8N(6.0kgf) |
Concentricity | 10μm |
Finish | Black anodized |
Parallelism | 50μm |
Wobble | 0.01mm |
Sensor / Output Logic | When shaded: Output transistor OFF (no conduction): Limit sensor When shaded: Output transistor ON (conduction): Origin sensor |
Sensor / Current Consumption | 60mA or lower (20mA or lower per sensor) |
Sensor / Control Output | NPN open collector output DC30V or lower, 50mA or lower |
Sensor / Power Voltage | DC5~24V±10% |
Motor / Motor Step Angle | 0.72° |
Motor / Motor Type | 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.) |
Motor / Motor Part Number | PK523HPB-C12(□28mm) |
Compatible Controller | GSC-01、GIP-101、GSC-02、SHOT-702、SHOT-302GS、SHOT-304GS、HIT-M・HIT-S、PGC-04-U、HSC-103 |
Compatible Driver | SG-5M、SG-5MA、MC-S0514ZU、SG-514MSC、MC-7514PCL |