Rotation Motorized Stages / SGSP-80YAW
Stepping motor driven rotation stages utilizing precision bearings and worm gear drive mechanisms.
Contact us
Part Number
SGSP-80YAW
◦Suitable for rotating optics aout the optical axis, measuring, inspection and evaluation instruments.
◦360° continuous motion
◦Low, compact profile Adapters to hold a variety of optics are available.
◦360° continuous motion
◦Low, compact profile Adapters to hold a variety of optics are available.
| Catalog Code | W9028 |
|---|---|
| RoHS | No |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Guide | ▶Homing of rotation motorized stages is performed using the CW limit sensor as the origin sensor. ▶Origin detection is adjusted so that the stage stops at 0 degree when homing is performed in the MINI system at half step. |
| Attention | ▶Load capacity and precision may be derated when mounted upside down or vertically. Contact us for informations regarding your specific application. |
| MAX Speed | 30°/sec |
| Stage Material | Aluminium/Aluminum bronze |
| Sensor Part Number | Micro photo sensor : PM-F24(SUNX Co., Ltd.) |
| Stage Size | φ80mm |
| Backlash | 0.08° |
| Moment Stiffness | 0.2″/N･cm |
| Limit Sensor | Equipped (NORMAL CLOSE) |
| Lost Motion | 0.05° |
| Positioning Accuracy | 0.15° |
| Positioning Slide | Bearing method |
| Travel Mechanism (reduction ratio) | Worm gear (1:144) |
| Rotation Range | Move in the counterclockwise CCW direction to ∞, and stop at near 0 degree (−2.5°) in the clockwise CW direction. |
| Proximity Origin Sensor | None |
| Positional Repeatability | 0.02° |
| Origin Sensor | None |
| Minimum Incremental Motion (reference) | 0.5mdeg |
| Weight | 1.1kg |
| Load Capacity | 98N（10.0kgf） |
| Concentricity | 30μm |
| Resolution (Full) | 0.005°/pulse |
| Resolution (Half) | 0.0025°/pulse |
| Parallelism | 50μm |
| Wobble | 0.02mm |
| Sensor / Output Logic | When shaded: Output transistor OFF (no conduction) |
| Sensor / Current Consumption | 15mA or lower |
| Sensor / Control Output | NPN open collector output DC30V or lower, 50mA or lower |
| Sensor / Power Voltage | DC5～24V±10％ |
| Motor / Motor Step Angle | 0.72° |
| Motor / Motor Type | 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.) |
| Motor / Motor Part Number | C9865-90215P（□28mm） |
| Compatible Controller | SHOT-702、GIP-101、SHOT-302GS、SHOT-304GS、HIT-M・HIT-S、PGC-04-U、HSC-103 |
| Compatible Driver | MC-S0514ZU、SG-514MSC､MC-7514PCL |
Related Products
