Cage Tilt Mount (Micrometer Type) / C16-KNHM-12.7M
Kinematic mirror mount for vertical light incidence with precise angle adjustment, placed at the rod end of the Cage Systems.
Contact us
Part Number
C16-KNHM-12.7M
S$335.22
- The -M/-PDM at the end of the part number indicates the type of actuator for Tip/Tilt adjustment, where M stands for a built-in micrometer for manual adjustment and PDM stands for a built-in piezo drive motor for automatic, remote adjustment.
(However, both Tip/Tilt can only move within a range of ±3°.) - The actuator type of the Micrometer Head and Piezo Drive Motor can be changed.
- The mirror is held in place at three points on the sides, including the mirror retaining mechanism, such that the force can be adjusted with set screws.
- The clear aperture of the mirror can be large because the effective diameter is not limited by the retaining ring.
- The clear aperture of transmission is also large and can be used to adjust Optical Devices not limited to mirrors.
RoHS | Yes |
---|---|
CE | No |
CAD data | |
Guide | |
Attention |
|
Installation | Slide from the end of rods |
Adjustment Range /Tilt | ±3 ° |
Adjustment Range /Rotation | ±3 ° |
Compatible Optics Diameter | φ12.7 mm |
Resolution /Tilt | About 1.06 °/rotation |
Resolution /Rotation | About 1.06 °/rotation |
Micro Indicator Conversion /Tilt | About 0.021 °/DIV |
Micro Indicator Conversion /Rotation | About 0.021 °/DIV |
Guide Rod Diameter (Spaceing between rod) | φ4mm (16x16mm) |
Weight | 0.07 kg |
Primary material | Aluminum |
Number of Adjustment Axes | 2 axes |
Compatible Optics Thickness | 3 - 6.5 mm |
Finish | Black anodized |
Clear aperture | φ11 mm |