CONTACT US        |       Tel : (65) 9232 3999       |       Email : [email protected]
Compare Products
My Quote
Loading...

Cage Rotating Mount (Piezo Drive Motor Type) / C16-KM-12.7PDM

Mounts that can be integrated into the Cage Systems and allow the optics or adapters to rotate about the optical axis. Ideal for devices that require precise rotational adjustment, such as Polarizers.

Contact us

Part Number
C16-KM-12.7PDM
S$1,161.36
Wish List Compare
  • It can be used while switching between coarse rotation of 360° and fine rotation of ±5°.
  • The -M/-PDM at the end of the part number indicates the type of actuator for rotation adjustment, where M stands for a built-in micrometer for manual adjustment and PDM stands for a built-in piezo drive motor for automatic, remote adjustment. (However, it can only move in the range of ±5°.)
  • The fine adjustment mechanism is equipped with an opposing clamp for locking.
  • The C30 and C32 types have M3 adapter mounting screw holes on the rotary table surface.
  • The main angle scale is marked on the side of the rotary mount and the secondary scale on the main body, allowing fine rotational angle readings.
More Information
RoHS Yes
CE No
CAD data
DXF
STP
IGES
SAT
Guide
  • By tightening the Coarse/Fine switching clamp, the operation is changed to fine rotation (±5°) by the actuator.
    (When adjusting rotation with fine adjustment, fully loosen the opposing clamp before use.)
  • Tightening the Coarse/Fine switching clamp and lightly applying the opposing clamp will completely immobilize the rotating mechanism.
  • The side of the mount has M4 tapped holes, so it can be integrated not only into a cage system, but also fixed to Posts (ROC) or Pedestal Bases (PST) for use.
Attention
  • The knob of the opposing clamp should be turned lightly and stopped when it hits the fine adjustment mechanism.
  • Continued turning of the knob may cause the actuator to fall out of the mount.
  • This product cannot be directly fixed on an optical breadboard or optical table surface like a rotation stage.
  • Please use this product with a Cage Systems or Rods.
  • Since the angle scale is marked directly on the rotation frame ( rotation table), the position of 0° cannot be changed.
  • If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders.
  • Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder.
Installation Slide from the end of rods
Compatible Optics Diameter φ12.7 mm
Guide Rod Diameter (Spaceing between rod) φ4mm (16x16mm)
Weight 0.055 kg
Primary material Aluminum
Adjustment Range /Rotation 360°
Compatible Optics Thickness 3 - 6.5 mm
Fine-Adjustment Range /Rotation ±5°
Finish Black anodized
Scale MIN Reading 2°
Clear aperture φ10 mm
Related Products
OptoSigma Southeast Asia Pte.Ltd.
  • 83 Science Park Drive, #02-01 The Curie, Singapore 118258
  • TEL.+65 69099318
  • FAX.+65 69099330
  • E-mail [email protected]
Global Network
Product Categories
Request for Catalogues
YouTube
Account Registration / Sign In
SUPPORT & CONTACT US
SOFTWARE INFORMATION
COMPANY SITE
CAREERS
Copyright OptoSigma Southeast Asia All Rights Reserved.
Site map　Privacy policy