Cage Two Axis Holder with Tilt / C30-ALH5-25.4
Tilt adjustment is added to Cage cross movement holder. It can be used as a device holder to adjust the positioning of the optics requires centering.
In stock
Part Number
C30-ALH5-25.4
S$329.54
◦C30-ALH can be placed in the center of the cage since holes for rods passes through the holder.
◦The tilt mechanism has a three-axis adjustment knob for fine adjustment of the optics in the optical axis direction.
◦The cross movement mechanism is equipped with a clamp to fix the center position of the optics after adjustment. It can be assembled with the base with M4 rods.
◦The tilt mechanism has a three-axis adjustment knob for fine adjustment of the optics in the optical axis direction.
◦The cross movement mechanism is equipped with a clamp to fix the center position of the optics after adjustment. It can be assembled with the base with M4 rods.
Catalog Code | W4801 |
---|---|
RoHS | Yes |
CE | No |
CAD data | |
Attention | ▶The adjustment mechanism is not equipped with a clamp to fix the adjustment status. |
Installation | Slide from the end of rods |
Adjustment Range /Tilt | ±3° |
Adjustment range /Cross-movement | φ2mm |
Adjustment Range /Rotation | ±3° |
Compatible Optics Diameter | φ25.4mm |
Resolution /Tilt | 0.32°/rotation |
Resolution /Rotation | 0.32°/rotation |
Resolution / Cross-movement | 0.25mm/rotation |
Guide Rod Diameter (Spaceing between rod) | φ6mm (30x30mm) |
Weight | 0.2kg |
Primary material | Aluminum |
Compatible Optics Thickness | - 9mm |
Finish | Black Anodized |
Clear aperture | φ22mm |