Cage Tilt Mount (Piezo Drive Motor Type) / C32-KNHM-30PDM
Kinematic mirror mount for vertical light incidence with precise angle adjustment, placed at the rod end of the Cage Systems.
Contact us
Part Number
C32-KNHM-30PDM
S$2,136.36
- The -M/-PDM at the end of the part number indicates the type of actuator for Tip/Tilt adjustment, where M stands for a built-in micrometer for manual adjustment and PDM stands for a built-in piezo drive motor for automatic, remote adjustment.
(However, both Tip/Tilt can only move within a range of ±3°.) - The actuator type of the Micrometer Head and Piezo Drive Motor can be changed.
- The mirror is held in place at three points on the sides, including the mirror retaining mechanism, such that the force can be adjusted with set screws.
- The clear aperture of the mirror can be large because the effective diameter is not limited by the retaining ring.
- The clear aperture of transmission is also large and can be used to adjust Optical Devices not limited to mirrors.
RoHS | Yes |
---|---|
CE | No |
CAD data | |
Guide | |
Attention |
|
Installation | Slide from the end of rods |
Adjustment Range /Tilt | ±3 ° |
Adjustment Range /Rotation | ±3 ° |
Compatible Optics Diameter | φ30 mm |
Guide Rod Diameter (Spaceing between rod) | φ6mm (32x32mm) |
Weight | 0.19 kg |
Primary material | Aluminum |
Number of Adjustment Axes | 2 axes |
Compatible Optics Thickness | 3 - 6.5 mm |
Finish | red anodized |
Clear aperture | φ27 mm |