Cage 45-Degree Mirror Mount / C32-AMHS3-30
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
In stock
Part Number
C32-AMHS3-30
S$272.72
◦ There are three types of cage systems, including the original size of □32mm corner arrangement (C32 series) which uses 6mm diameter rods, □30mm corner arrangement (C30 series) and □60mm corner arrangement (C60 series).
Furthermore, there are fourth type of cage system, which is the □16mm corner layout (C16 series) which uses a dedicated 4mm diameter rod that allows for further miniaturization.
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
| Catalog Code | W4820 |
|---|---|
| RoHS | Yes |
| CE | No |
| CAD data | |
| Guide | ▶Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog. ▶For consultation of optical system using cage system please contact Sales. |
| Attention | ▶If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders. ▶Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder. ▶When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration. |
| Compatible Optics Diameter | φ30mm |
| Guide Rod Diameter (Spaceing between rod) | φ6mm （32x32mm） |
| Weight | 0.2kg |
| Primary material | Aluminum |
| Number of Adjustment Axes | 3 points |
| Adjustment Range /Tilt | ±3° |
| Adjustment Range /Rotation | ±3° |
| Compatible Optics Thickness | 4 - 10mm |
| Incident angle | 45° |
| Finish | Red Anodized/ Black Anodized |
| Resolution /Tilt | 0.44°/rotation |
| Resolution /Rotation | 0.44°/rotation |
| Clear aperture | φ27mm |
