Blade Type Automatic Diaphragm (High power capacity) / C30-SSH-17IRS
Motor driven diaphragm for remote operation.
The shutter uses stainless steel blades and therefore can be used with low to medium power lasers.
There are two types of aperture diameter, 1/2 inch and 1 inch.
The shutter uses stainless steel blades and therefore can be used with low to medium power lasers.
There are two types of aperture diameter, 1/2 inch and 1 inch.
In stock
Part Number
C30-SSH-17IRS
S$681.81
◦The diaphragm diameter can be freely adjusted with the operation knob (Iris VR) of the controller (SSH-C1IR).
◦When the operation knob (Iris VR) is closed, the light can be completely blocked.
◦In addition to assemble with a post, SSH-IR can be used with cage system.
◦Please use with designated controller SSH-C1R and cable SSH-AIR-CA-2.
◦When the operation knob (Iris VR) is closed, the light can be completely blocked.
◦In addition to assemble with a post, SSH-IR can be used with cage system.
◦Please use with designated controller SSH-C1R and cable SSH-AIR-CA-2.
Catalog Code | W4053 |
---|---|
RoHS | Yes |
CE | No |
CAD data | |
Guide | ▶Please use designated controller SSH-C1R and cable SSH-AIR-CA-2. |
Attention | ▶Blade type automatic diaphragm cannot be used with high-power lasers or high-energy pulse lasers. ▶The controller SSH-C2B, SSH-C4RA, SSH-C1RA or SSH-C1RA-H cannot be used with SSH-IR. |
Remarks | ▶(Test result example) After being irradiated for 4 hours with 1064nm laser with power of 2000mW and beam diameter of 4.0mm (power density of about 159mW/mm2), no damage was found on blade. |
Applicable size of cage | C30 |
Minimum aperture diameter | 0mm |
Maximum aperture diameter | 17mm |
Weight | 0.100㎏ |
Ambient Humidity | 20 - 80%RH(without condensation) |
Operating Temperature | 5 - +40℃ |
Storage Temperature | -20 - +60℃ |