Light path corrector / WSQNA-50S03-1-266-0/45D
With a variable beamsplitter, the incident angle of a laser can be changed. The (R:T) ratios can also be modified. This is commonly used to adjust the light intensity of the laser without a variable adjustment of the light intensity or the laser to be stabilized.
Contact us
Part Number
WSQNA-50S03-1-266-0/45D
S$325.00
◦The beam shift caused by the tilt of the beamsplitter can be removed by using a correcting plate. (See how to use)
◦It can be used for arbitrary polarization. However, the transmittance characteristic depends on the polarization.
◦It can be used for arbitrary polarization. However, the transmittance characteristic depends on the polarization.
| Catalog Code | W3023 | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RoHS | Yes | ||||||||||||||||||||
| CE | No | ||||||||||||||||||||
| Download Product's Datasheet | |||||||||||||||||||||
| Guide | ▶Different size | ||||||||||||||||||||
| Attention | ▶When using with high power laser, make sure to execute at the end edge of the reflected light. ▶The reflectance properties of the optics may change in a high temperature environment. ▶When adjusting the transmittance, the incident angle may change and cause the light path to shift. To correct this, please use the light path corrector (model WSQNA/WBNA) ▶For a large beam size of 30mm diameter or larger and used it at a high inclinaｔion level, the beam can be cut at the reflected area. ▶For “P” polarization use, make sure that the incident angle is at 45 degrees or more. |
||||||||||||||||||||
| Specifications |
|
Related Products
