Chromium Cube Half Mirror / CSCH-40-550
Chromium cube half mirrors consist of two right angle prisms. One of them is coated with chromium (Cr) on the hypotenuse face. Half mirror divides input beam to reflectance and transmittance in 1:1. A beamsplitter of R:T=1:1 is called “Half Mirror”.
Contact us
Part Number
CSCH-40-550
S$615.34
◦Four surfaces of the cube are coated with multi-layer anti-reflection coatings.
◦Approximately one third of the input beam is lost because of absorption of chromium coating on the hypotenuse. However these beamsplitters are not wavelength, polarization and incident angle of the input beam dependent and therefore provide a highly neutral reflectivity.
◦For cube beamsplitters, unlike plate beamsplitters, transmission beam deviations and ghosts rarely occur.
◦Approximately one third of the input beam is lost because of absorption of chromium coating on the hypotenuse. However these beamsplitters are not wavelength, polarization and incident angle of the input beam dependent and therefore provide a highly neutral reflectivity.
◦For cube beamsplitters, unlike plate beamsplitters, transmission beam deviations and ghosts rarely occur.
Catalog Code | W3014 | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RoHS | Yes | ||||||||||||||||||||||||
CE | No | ||||||||||||||||||||||||
Download Product's Datasheet | |||||||||||||||||||||||||
Guide | ▶Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.) WEB Reference Catalog Code/W3802 ▶For a guarantee in reflected wavefront error or transmitted wavefront error |
||||||||||||||||||||||||
Attention | ▶Input beam from the prism side is indicated by a “○”. ▶Phase retardation of light input will not be preserved. Use a waveplate for phase compensation. ▶Wavelength dispersion of transmitted and reflected light is derived from refractive index and glass thickness and when diverging or introducing a focusing beam, chromatic aberration or spherical aberration may occur. ▶The transmittance curves are based on actual measurements and may vary with manufacturing lots. ▶The surface flatness is the reflected wavefront distortion of the surface before coating. ▶Be sure to wear laser safety goggles when checking optical path and adjusting optical axis. |
||||||||||||||||||||||||
Specifications |
|