Color Correction Filter / ECM-50S-500
The filter that can simulate the sensing of a human eye which is similar the silicon pixel detector sensor with a wavelength located at a peak at the NIR range. It is also widely as a filter attached to a CCD sensor.
In stock
Part Number
ECM-50S-500
S$180.68
◦Use the filter to correct the unnatural color taken with an IR camera.
◦The CCF5000 can be used in natural environment or outside, the surface of the filter is tough and hard to burn.
◦The CCF 500 and CCF 5000 have the same characteristics until 900nm, above 900nm the transmittance is different.
◦The color of the ECM-500 is darker than the CCF-500 and CCF-5000 and is fit for use to cut off the NIR light.
◦The CCF5000 can be used in natural environment or outside, the surface of the filter is tough and hard to burn.
◦The CCF 500 and CCF 5000 have the same characteristics until 900nm, above 900nm the transmittance is different.
◦The color of the ECM-500 is darker than the CCF-500 and CCF-5000 and is fit for use to cut off the NIR light.
Catalog Code | W3112 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
Guide | ▶We can produce custom sizes |
Attention | ▶The absorption wavelength range can not be used with high power laser and high energy pulsed laser. ▶There is no coating on both surfaces of the filter resulting in about a 10% transmission loss. ▶The ECM-500 and the CCF-500 are less resistance for an outside environment use and burn or smoke easier than the CCF-5000 over time. |
Average transmittance (400 − 600nm) | 82.7% |
Average Transmittance (absorption limit long wavelength − 1200nm) | <0.5% |
Transition wavelength | 626nm |
Material | Glass (containing a substance of optical absorption) |
Transmittance at longt absorption limit | <0.3% |
Absorption limit long wavelength | 766nm |
Transmittance at 600nm | About 50% |