Paraboloid Mirror / TCPA-100C-12.5-SH18
Paraboloid mirror is a curved mirror that converts diverging light from a point of light source into parallel light. By making the paraboloid a curved surface, it is possible to retrieve parallel light more efficiently than a spherical concave mirror. An example use of paraboloid mirror is as a lamp reflector of a microscope.
Contact us
Part Number
TCPA-100C-12.5-SH18
S$340.90
◦It obtains high performance condensing by precision aspheric surface processing.
◦It can provide long-term stability because it has a protective scratch-resistant coating over aluminum.
◦It is easy to position the light source at the focusing point because there is a hole on the axis of the paraboloid.
◦By entering the thick parallel light, it allows the light to be collected at one point.
◦It can provide long-term stability because it has a protective scratch-resistant coating over aluminum.
◦It is easy to position the light source at the focusing point because there is a hole on the axis of the paraboloid.
◦By entering the thick parallel light, it allows the light to be collected at one point.
Catalog Code | W3180 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
Guide | ▶Tempax® is a registered trademark of SCHOTT AG company. ▶Different focal length |
Attention | ▶Light does not reach to the mirror surface when high directivity source is placed at focal point, so it is not available to get the effect of paraboloid mirror. ▶Light near the optical axis center is not reflected by the hole in the mirror, there is a case that intensity distribution of the parallel light becomes ring-shaped. ▶When focusing the light emitted from a parabolic mirror by a lens, it does not focused at one point by the influence of light incident on the lens directly from the lamp. |
Thickness H | 46mm※ |
Hole dimension φC | φ18mm |
Coating | Al+SiO2 |
Diameter φD | φ100mm |
Focal length f | 12.5mm |