Spatial Filter Holder / SFB
Spatial filters eliminate distorted laser wavefronts and noise to emit clean spherical waves for beams.
Used in optical systems such as interferometers and holograms where wavefront quality is critical.
A well corrected achromat in the output beam of the spatial filter can be used to collimate the filtered beam.The translation stage and two-axis pinhole allows the light through the objective lens to have good reproducibility.
Designed with an emphasis on stability, beam movement during adjustment is minimal.
A PA-25 (hole diameter 25μm) pinhole is included. Pinholes can be changed to match the diameter of the laser spot.
A Coarse/fine pinhole adjustment (SFB-16DMRO) is also available
To meet a variety of requirements, the mounting position of the objective lens can be changed, allowing objective lenses with different magnifications to be used.
Common Specifications
Primary Material | Steel, Aluminum | |
---|---|---|
Finish | Black Chrome, Black Anodized |
Specifications
Micrometer | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Part Number | Objective Lens | Objective Lens Length | Compatible Incidence Beam diameter (1/e2) | Pinhole Diameter | Pinhole XY Adjustment Range | Objective Lens Front and Back Adjustment Range | Pinhole XY Scale MIN Reading | Objective Lens Front and Back Scale MIN Reading | Weight | |||
With a Post φ20mm |
Mounting Hole: M6 (Without a Post) |
Mounting Hole: 8-32UNC (Without a Post) |
||||||||||
SFB-16RO-OBL10-25 | SFB-16RO-OBL10-25-N | SFB-16RO-OBL10-25-UU | OBL-10-A | 30.5mm | φ1.0mm | φ25mm | ±2mm | ±3mm | 0.01mm/DIV | 0.01mm/DIV | 0.56kg (Without a Post: 0.45kg) |
|
SFB-16RO-OBL20-25 | SFB-16RO-OBL20-25-N | SFB-16RO-OBL20-25-UU | OBL-20-A | 35.2mm | φ0.6mm | φ25mm | ±2mm | ±3mm | 0.01mm/DIV | 0.01mm/DIV | 0.56kg (Without a Post: 0.45kg) |
|
SFB-16RO-OBL40-25 | SFB-16RO-OBL40-25-N | SFB-16RO-OBL40-25-UU | OBL-40-A | 36.5mm | φ0.3mm | φ25mm | ±2mm | ±3mm | 0.01mm/DIV | 0.01mm/DIV | 0.56kg (Without a Post: 0.45kg) |
Coarse/Fine Movement | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Part Number | Objective Lens | Objective Lens Length | Compatible Incidence Beam diameter (1/e2) | Pinhole Diameter | Pinhole XY Adjustment Range | Objective Lens Front and Back Adjustment Range | Pinhole XY Coarse Resolution | Pinhole XY Scale MIN Reading | Objective Lens Front and Back Scale MIN Reading | Weight | ||
With a Post φ20mm |
Mounting Hole: M6 (Without a Post) |
Mounting Hole: 8-32UNC (Without a Post) |
||||||||||
SFB-16DMRO-OBL10-25 | SFB-16DMRO-OBL10-25-N | SFB-16DMRO-OBL10-25-UU | OBL-10-A | 30.5mm | φ1.0mm | φ25mm | ±2mm | ±3mm | 0.5mm/rotation | 0.0025mm/DIV | 0.01mm/DIV | 0.6kg (Without a Post: 0.41kg) |
SFB-16DMRO-OBL20-25 | SFB-16DMRO-OBL20-25-N | SFB-16DMRO-OBL20-25-UU | OBL-20-A | 35.2mm | φ0.6mm | φ25mm | ±2mm | ±3mm | 0.5mm/rotation | 0.0025mm/DIV | 0.01mm/DIV | 0.6kg (Without a Post: 0.41kg) |
SFB-16DMRO-OBL40-25 | SFB-16DMRO-OBL40-25-N | SFB-16DMRO-OBL40-25-UU | OBL-40-A | 36.5mm | φ0.3mm | φ25mm | ±2mm | ±3mm | 0.5mm/rotation | 0.0025mm/DIV | 0.01mm/DIV | 0.6kg (Without a Post: 0.41kg) |