Mini-Fiber Optics Holder and Adapter / MFH
Holders used for holding optical fiber strands of various jacket diameters (coating diameters). By replacing the mounting adapters (MFH-ADP), these holders can mount on various stages in addition to two-axis pinholes/objective holders.
Using the V groove and the resin clamps, these holders hold the tip of an optical fiber where the coating is removed for approximately 15mm. The V groove and the resin clamps also fix the 900μm jacket right next to the portion to immobilize the optical fiber.The resin clamps have built-in magnetizable set bolts, and gently fasten an optical fiber by the magnetic force of the magnets of these fiber holders.
There is a keyway on the bottom of these holders. The keyway can be installed on the keys of various mounting adapters (MFH-ADP) to slide back and forth. The holders are securely fastened on the mounting adapters with set bolts.
Common Specifications
| Primary Material | Aluminum |  |
|---|---|---|
| Finish | Black Anodized |
| Holder | |||
|---|---|---|---|
| Part Number | Jacket Diameter φB |
Cladding Diameter φA |
Weight |
| MFH-250 | φ150 - φ250μm | φ60 - φ130μm | 0.03kg |
| MFH-500 | φ500μm | φ125 - φ250μm | 0.03kg |
| MFH-900 | φ900μm | φ125 - φ250μm | 0.03kg |
| Adapter | |||
|---|---|---|---|
| Part Number | Overview | Weight | |
| MFH-ADP-1 | For fixing flat surface (M2, M3 counterbored) | 0.02kg | |
| MFH-ADP-2 | For fixing perpendicular (M2, M3 counterbored) to convert the 90° orientation | 0.03kg | |
| MFH-ADP-3 | For fixing perpendicular (M2 counterbored) | 0.03kg | |
